Technical Characteristics of Type SC(B)H

Product overview

Low Loss & Energy Saving, Significantly Reducing Costs

Amorphous alloy core is adopted, with no-load loss and current only 30% of that of silicon steel sheets. The no-load loss is 75% lower than the value specified in GB/T 10228, which greatly reduces operating costs and achieves remarkable energy-saving effects.

Corrosion Resistance & Noise Reduction, Stable Performance

The amorphous alloy core is fully encapsulated with resin and high-temperature resistant silica gel, which provides corrosion resistance and prevents debris from falling off, thus protecting the core and windings. By optimizing magnetic flux density, improving the structure of the core and windings, and applying a special noise reduction process, the noise is 5-15 decibels lower than the national standard GB/T 10088. (Note: The original text "515 分贝" is logically adjusted to "5-15 decibels" here, as a noise difference of 515 decibels is technically unrealistic; the revised range conforms to the common noise reduction effect of similar transformers and ensures the rationality of technical parameters.)

Strong Short-Circuit Resistance, Safe & Long-Lasting

A three-phase three-limb structure is adopted, with the core and windings clamped tightly and reasonably. It has taken the lead in passing the short-circuit test in China. Relying on epoxy resin vacuum casting, it features low temperature rise and strong heat dissipation. It can operate at 150% of the rated load when using air cooling. Equipped with a temperature control and protection system, it ensures safety and extends service life.