SC(B)H15 Amorphous Alloy Dry-Type Transformer
Standards
GB / IEC 60076
Testing
Routine report
Origin
China
SC(B)H15 Amorphous Alloy Dry Transformers
315 kVA amorphous alloy type Dry-Type Transformer
The current distribution field is generally facing industry pain points such as high energy consumption and high operation and maintenance costs. Traditional Oil Immersed Transformers are prone to safety hazards and have caused long-term troubles for enterprises. We have launched the 315KVA amorphous alloy type dry-type transformer, which is based on the non-ferrous alloy core technology. It provides users with efficient and reliable distribution solutions and has achieved significant energy consumption reduction and safety improvement in practical applications. This product belongs to the upgraded category of Dry Type Transformers and is widely applicable to scenarios such as Combined Photovoltaic Substations and Box Type Substations. It can also work in coordination with High And Low Voltage Switchgear , Electric Power Converter , etc., and is suitable for various scenarios such as industrial and commercial distribution, photovoltaic grid connection, and mine power supply, bringing stable and efficient power guarantees to users.
- Product type
- SC(B)H15 Amorphous Alloy Dry-Type Transformer
- Rated capacity
- 315 kVA
- Voltage class
- 10 kV / 20 kV / 35 kV
- Insulation
- Cast epoxy resin, Class F/H
- Cooling
- AN / AF
- Winding
- Copper or aluminium (project-specific)
Final ratings, losses, impedance and dimensions are confirmed on the approved datasheet. Website values are for family selection.
- Routine test report with the unit
- English GA drawing and O&M manual
- Copper or aluminium winding options
- 50 Hz / 60 Hz and harsh-site options
Product overview
The current distribution field is generally facing industry pain points such as high energy consumption and high operation and maintenance costs. Traditional Oil Immersed Transformers are prone to safety hazards and have caused long-term troubles for enterprises. We have launched the 315KVA amorphous alloy type dry-type transformer, which is based on the non-ferrous alloy core technology. It provides users with efficient and reliable distribution solutions and has achieved significant energy consumption reduction and safety improvement in practical applications. This product belongs to the upgraded category of Dry Type Transformers and is widely applicable to scenarios such as Combined Photovoltaic Substations and Box Type Substations. It can also work in coordination with High And Low Voltage Switchgear , Electric Power Converter , etc., and is suitable for various scenarios such as industrial and commercial distribution, photovoltaic grid connection, and mine power supply, bringing stable and efficient power guarantees to users.
Design features
What the design is built around
Ultra-low no-load loss
Utilizing amorphous alloy core material, compared to traditional silicon steel sheet transformers, the no-load loss is reduced by approximately 70%. This results in significant electricity cost savings over the long term, especially suitable for industrial and photovoltaic scenarios with fluctuating load rates.
High safety and stability
Oil-free design eliminates the risks of fire and explosion, making it suitable for indoor and densely populated areas with high safety requirements. It also has moisture-proof and dust-proof features, and can adapt to complex working conditions.
Purchase and Usage Tips
When installing, ensure there is sufficient space for heat dissipation. Avoid stacking the device too closely with other devices to allow for proper ventilation and heat dissipation, thereby extending the service life of the equipment.
During daily maintenance, there is no need to replace the insulating oil. Just clean the surface dust regularly and check the tightness of the connection terminals. This approach results in low operating costs.
Typical specification
Specifications to confirm on the datasheet
| Product type | SC(B)H15 Amorphous Alloy Dry-Type Transformer |
|---|---|
| Rated capacity | 315 kVA |
| Voltage class | 10 kV / 20 kV / 35 kV |
| Insulation | Cast epoxy resin, Class F/H |
| Cooling | AN / AF |
| Winding | Copper or aluminium (project-specific) |
| Standards | GB 1094.1, GB/T 6451, IEC 60076-11 |
| Testing | Routine tests, partial discharge and temperature-rise type tests |
The table is a family-level starting point. The approved datasheet fixes the guaranteed values, drawing dimensions and test plan for the specific order.
Typical applications
- Data centres with long low-load hours
- Commercial buildings
- Street lighting and utilities
- Renewable-energy auxiliary systems
- Low-load industrial duty
Confirm before ordering
- Rated capacity, voltage ratio and tap range
- Impedance, fault level and parallel operation
- Ambient temperature, altitude and enclosure
- Winding material, losses and efficiency class
- Terminations, protection and monitoring
- Tests, inspection, packing and shipping limits
Buyer questions
FAQ for 315 kVA amorphous alloy type Dry-Type Transformer
What is 315 kVA amorphous alloy type Dry-Type Transformer best used for?
What is the typical lead time for 315 kVA amorphous alloy type Dry-Type Transformer?
Which standards and tests apply to dry-type transformers?
Can a dry-type transformer be installed outdoors?
How do I choose between copper and aluminium windings?
Project inquiry
Tell us what the transformer has to do.
Load, voltage class, site conditions, standards and required documents are enough to start. We reply through the inquiry thread.